尼日尔三角洲东部深水区构造特征及其形成机理     

赵江  王秋良  卢圣力  付博  杜峰 《大地测量与地球动力学》2019,39(7):691-695

研究尼日尔三角洲东部深水区块发现，整个盆地从陆向洋具有3个大的构造分区：伸展拉张区、过渡区和挤压逆冲区。伸展区以大型同沉积断层伴生大量滚动背斜构造为特征，过渡区发育大量泥底辟构造，挤压区以复杂的逆冲叠瓦构造为主。通过分析形成机理，揭示东部深水转换带上M研究区构造特征，按构造的演化特征将该区构造分为泥底辟型、冲断-泥底辟混合型、逆冲型3种类型，提出研究区内的圈闭主要以构造-岩性圈闭为主，为尼日尔三角洲盆地深水勘探提供新的理论指导。  相似文献   

Drying increases organic colloidal mobilization in the karst vadose zone: Evidence from a 15-year cave-monitoring study     

Jin Liao  Chaoyong Hu  Xiuli Li  Jiaoyang Ruan 《水文研究》2021,35(4):e14163

Understanding the hydrological processes of colloids within the karst vadose zone is vital to the security of karst groundwater and providing appropriate paleohydrological explanations of colloid-facilitated metals in speleothem. This study addresses the mobilization mechanisms driving colloidal organic matter (COM) transport in the karst vadose zone using a 15-year long monthly monitoring dataset from a cave drip point (HS4) in Heshang Cave, Qingjiang Valley, China. Variations in COM concentrations were reported as the fluorescence difference values of raw and filtered (<0.22 μm) samples at an excitation wavelength of 320 nm and emission wavelength of ~400 nm. A fluorescence humification index (HIX) lower than 0.8 and an autochthonous index (BIX) higher than 1.2 indicated that the origin of COM was mainly from the karst vadose zone, rather than the soil zone. The COM concentration varied from 0.001 to 0.038 Raman Unit (RU), with evident seasonal fluctuations. Rising limbs for COM values occurred prior to rising limbs within a dripwater hydrograph; moreover, the COM peak values corresponding to the beginning of the increasing hydrograph generally suggested that the mobilization of COM reflected the movement of the air–water interface (AWI) in the karst vadose zone rather than rainfall intensity or flow velocity. COM peak values were positively correlated with the antecedent drying duration and negatively correlated with HIX values. These phenomena may be explained by the increased amount of organic matter that was aggregated and absorbed on the surface of carbonate in the karst vadose zone during a longer drying duration. Moreover, the longer drying duration was also beneficial to autochthonous biological activity, which subsequently decreased the HIX value of the organic matter in the karst vadose zone. The movement of AWI and the drying duration are both controlled by the outside weather conditions. This study is therefore conducive to evaluating the security of karst groundwater in response to climate change, and challenges prevailing paleoclimate interpretations of colloid-facilitated metal abundance timeseries reported from speleothems.  相似文献   

可可西里岩石圈向北俯冲到柴达木地幔的地震学证据          下载免费PDF全文

赵荣涛  赵文津  史大年  刘志伟  杨艳 《地球物理学报》2020,63(8):2940-2953

利用中美德INDEPTH IV合作项目2007—2009年间布置于青藏高原中、北部140个宽频地震台站记录到的天然地震数据,经过接收函数成像处理,获得了3条穿过昆仑—阿尼玛卿缝合带清晰的壳幔结构图像.结果显示柴达木南缘莫霍面位于约50 km深度,羌塘地块、可可西里地块、东昆仑造山带莫霍面位于约65 km深度,昆仑—阿尼玛卿缝合带以北约50 km存在莫霍面深度突变.在可可西里和柴达木岩石圈地幔之间观测到北倾界面,这可能是可可西里岩石圈向北俯冲到柴达木地幔之下的证据.可可西里地块地壳内宽缓的负转换震相带是低速带的反映,其向北挤入到东昆仑山下发生挤压增厚,可能是东昆仑山隆升的原因;由于刚性柴达木岩石圈的阻挡,物质向东改向,则可能是该地区向东旋转的构造应力场产生的原因.本文研究结果不支持亚洲岩石圈地幔在东昆仑—柴达木交界处向南俯冲,据此,我们提出了新的东昆仑造山模式.  相似文献   

Dynamic loading tests and seismic response analysis of a stud-type damper composed of multiple friction units with disc springs     

Takeshi Sano  Kazutaka Shirai  Yasumasa Suzui  Yoshikazu Utsumi 《地震工程与结构动力学》2020,49(13):1259-1280

This paper presents an experimental study on the performance of a shear-sliding stud-type damper composed of multiple friction units with high-tension bolts and disc springs. A numerical evaluation of the response reduction effects achieved by the stud-type damper is also presented. In dynamic loading tests, the behavior of stud-type multiunit friction damper specimens was investigated. Three different full-scale damper specimens, which were composed of five, six, or seven friction units with two or four sliding surfaces, were incorporated into loading devices for testing. The stud-type friction dampers demonstrated stable rigid-plastic hysteresis loops without any remarkable decrease in the sliding force even when subjected to repetitive loading, in addition to showing no unstable behavior such as lateral buckling. The damper produced a total sliding force approximately proportional to the number of sliding surfaces and friction units. The total sliding force of the stud-type damper can thus be estimated by summing the contributions of each friction unit. In an earthquake response simulation, the control effects achieved by stud-type dampers incorporated into an analytical high-rise building model under various input waves, including long-period, long-duration and pulse-like ground motions, were evaluated. A satisfactory response reduction was obtained by installing the developed stud-type dampers into the main frame without negatively impacting usability and convenience in terms of building planning.  相似文献   

Forests and floods: Using field evidence to reconcile analysis methods     

James C. Bathurst  Barry Fahey  Andrés Iroumé  Julia Jones 《水文研究》2020,34(15):3295-3310

The extent to which forests, relative to shorter vegetation, mitigate flood peak discharges remains controversial and relatively poorly researched, with only a few significant field studies. Considering the effect purely of change of vegetation cover, peak flow magnitude comparisons for paired catchments have suggested that forests do not mitigate large floods, whereas flood frequency comparisons have shown that forests mitigate frequencies over all magnitudes of flood. This study investigates the apparent inconsistency using field-based evidence from four contrasting field programmes at scales of 0.34–3.1 km². Repeated patterns are identified that provide strong evidence of real effects with physical explanations. Magnitude and frequency comparisons are both relevant to the impact of forests on peak discharges but address different questions. Both can show a convergence of response between forested and grassland/logged states at the highest recorded flows but the associated return periods may be quite variable and are subject to estimation uncertainty. For low to moderate events, the forested catchments have a lower peak magnitude for a given frequency than the grassland/logged catchments. Depending on antecedent soil saturation, a given storm may nevertheless generate peak discharges of the same magnitude for both catchment states but these peaks will have different return periods. The effect purely of change in vegetation cover may be modified by additional forestry interventions, such as road networks and drainage ditches which, by effectively increasing the drainage density, may increase peak flows for all event magnitudes. For all the sites, forest cover substantially reduces annual runoff.  相似文献   

Lidar-aided analysis of boreal forest backscatter at Ku band     

《International Journal of Applied Earth Observation and Geoinformation》2020

This paper analyzes the backscatter of the microwave signal in a boreal forest environment based on a Ku -band airborne Frequency-Modulated Continuous Waveform (FMCW) profiling radar—Tomoradar. We selected a half-managed boreal forest in the southern part of Finland for a field test. By decomposing the waveform collected by the Tomoradar, the vertical canopy structure was achieved. Based on the amplitude of the waveform, the Backscattered Energy Ratio of Canopy-to-Total (BERCT) was calculated. Meanwhile, the canopy fraction was derived from the corresponding point cloud recorded by a Velodyne VLP-16 LiDAR mounted on the same platform. Lidar-derived canopy fraction was obtained by counting the number of the first/ the strongest returns versus the total amount of returns. Qualitative and quantitative analysis of radar-derived BERCT on lidar-derived canopy fraction and canopy height are investigated. A fitted model is derived to describe the Ku-band microwave backscatter in the boreal forest to numerically analyze the proportion contributed by four factors: lidar-derived canopy fraction, radar-derived canopy height, the radar-derived distance between trees and radar sensor and other factors, from co-polarization Tomoradar measurements. The Root Mean Squared Error (RMSE) of the proposed model was 0.0958, and the coefficient of determination R2 was 0.912. The fitted model reveals that the correlation coefficient between radar-derived BERCT and lidar-derived canopy fraction is 0.84, which illustrates that lidar surface reflection explains the majority of the profiling /waveform radar response. Thus, vertical canopy structure derived from lidar can be used for the benefit of radar analysis.  相似文献   

In-season crop classification using elements of the Kennaugh matrix derived from polarimetric RADARSAT-2 SAR data     

《International Journal of Applied Earth Observation and Geoinformation》2020

Accurate spatio-temporal classification of crops is of prime importance for in-season crop monitoring. Synthetic Aperture Radar (SAR) data provides diverse physical information about crop morphology. In the present work, we propose a day-wise and a time-series approach for crop classification using full-polarimetric SAR data. In this context, the 4 × 4 real Kennaugh matrix representation of a full-polarimetric SAR data is utilized, which can provide valuable information about various morphological and dielectric attributes of a scatterer. The elements of the Kennaugh matrix are used as the parameters for the classification of crop types using the random forest and the extreme gradient boosting classifiers.The time-series approach uses data patterns throughout the whole growth period, while the day-wise approach analyzes the PolSAR data from each acquisition into a single data stack for training and validation. The main advantage of this approach is the possibility of generating an intermediate crop map, whenever a SAR acquisition is available for any particular day. Besides, the day-wise approach has the least climatic influence as compared to the time series approach. However, as time-series data retains the crop growth signature in the entire growth cycle, the classification accuracy is usually higher than the day-wise data.Within the Joint Experiment for Crop Assessment and Monitoring (JECAM) initiative, in situ measurements collected over the Canadian and Indian test sites and C-band full-polarimetric RADARSAT-2 data are used for the training and validation of the classifiers. Besides, the sensitivity of the Kennaugh matrix elements to crop morphology is apparent in this study. The overall classification accuracies of 87.75% and 80.41% are achieved for the time-series data over the Indian and Canadian test sites, respectively. However, for the day-wise data, a ∼6% decrease in the overall accuracy is observed for both the classifiers.  相似文献   

顾及地形起伏的无人机影像覆盖分析方法     

张衡  李骁  叶朋飞 《测绘通报》2020,(1):102-106

使用无人机实施测绘航空摄影时，由于无人机相对航高较低，地面起伏会对无人机影像的分辨率、覆盖范围、重叠度造成较大的影响，影像成果会出现分辨率不足、重叠度不够、覆盖漏洞等缺陷。针对这一情况，本文提出了一种利用数字微分正解法的计算方法，借助DEM准确计算每张影像的覆盖范围，并使用FME软件高效生成全部影像的覆盖范围。经过实际使用，验证了该方法可以在航线设计阶段准确预测并分析全部影像的覆盖范围、重叠度，因此可及时发现设计问题并调整航线。该方法可以有效减少因地形起伏造成的影像覆盖缺陷，减少返工现象，从整体上提高了作业效率。  相似文献   

结合PS特征点的SBAS地表形变监测     

聂运菊  熊佳诚  程朋根  罗跃 《测绘通报》2020,(4):91-95

针对SARscape SBAS技术存在人工选取地面控制点影响监测结果的问题，本文提出了一种结合PS特征点的SBAS地表形变监测方法。通过设置PS技术中的振幅离差指数与相干性阈值，提取PS监测结果中的特征点作为地面控制点进行轨道精炼与形变反演。以2017年3月至2018年12月覆盖南昌地区的Sentinel-1影像为数据源，进行了地表形变监测与验证。结果表明：①该方法与PS方法监测结果均显示南昌市城区在监测时段内整体呈小幅度上升趋势，年平均沉降速率相关性达到了0.959，具有高度一致性。②将该方法、PS方法、人工选取地面控制点的SBAS方法的监测结果与水准数据进行对比，该方法与水准数据的误差不超过3.5 mm，说明了该方法的有效性。  相似文献   

曲靖非相干散射雷达电离层F区日间电子温度变化特征初步分析   总被引：1，自引：0，他引：1       下载免费PDF全文

丁宗华  代连东  杨嵩  唐志美  吴健  许正文 《地球物理学报》2020,63(4):1282-1293

利用曲靖非相干散射雷达2017-2018年春夏季观测数据首次分析了电离层日间150~450km电子温度的地方时与高度变化特征及其与电子密度的相关性.发现hmF2及以上的电子温度在日出日落时具有两个峰值,在11∶00-16∶00LT之间变化较小,高度越高午后上升的时间越早;从150km开始迅速增加,在约220km达到最大值,然后开始降低,在约300~350km达到最小值,最后单调上升;200km以下电子温度与电子密度成正相关(主要由热传导控制),200~450km之间存在明显的反相关(光电离过程占主导),电子-离子温度差与电子密度对数之间存在近似线性关系,电子温度逐日变化与光电离因子的变化趋势相似,这种相关性在中午与午后更明显;以上结果与其他非相干散射雷达观测和电离层模型计算结果基本一致,但也存在一些差别,需要结合更多数据深入分析.  相似文献